Recent Articles
CHeKT Bridge: Hardware Version CKB416v1
Unit Introduction: The CHeKT CKB416v1 is a 16 Channel Video Alarm Panel with the addition of hard-wired terminals for 12v DC Power, arming and a relay output. This is an improvement on our previous CKB416v0 . This unit also has a Primary Network Port ...
VMS Video Vault: Camera SD Card Access
SD card video retrieval with App use is now possible with any camera supporting the ONVIF Profile G Standard. This Knowledge Article will go over the set-up process for CHeKT's E-Series cameras. While any camera with Profile G should allow the usage ...
Monitoring Portal Site Procedures
The Monitoring Portal now has the ability to input annotations for any kind of Directions and Procedures that should be made evident for Operators when events occur. To begin, lets make sure we're in the right place for inputting information. When ...
Disarmed Events
Disarmed Events Select which plan works best. After logging into your Dealer Portal, select the VMS Service tab on the top of your Dealer Portal. From there, you can select which plan for the Video Vault you would like: Basic, Video Vault, Video ...
Connecting and Configuring an AXIS P4705-PLVE Panoramic Camera (Bridge FW 5.0 and Newer)
The AXIS P4705 Panoramic Camera can send independent network alarms into the CHeKT Bridge on each mounted lens. This article is designed to demonstrate the recommended configuration of this integration on the CHeKT Firmware Version 5.0 and beyond. ...