Adding an IP User to a Dealer Account

Adding an IP User to a Dealer Account

Authorized users have the option of adding an "IP user" account in their Dealer Portal. An IP user will allow access to the Dealer and Monitoring Portals without a username and password to connections sourced from the listed Public Domain. 

Adding an IP user:

  1. Click the Gear: 

  3. Click Users:

  5. Click "Add" to Bring Up the User Add Window

  7. With the Slider for "IP Login User" selected, enter the Public IP you wish to grant access (your current IP will be listed directly below the line), name the User and Click "create."

  9. After Creating, the user will show on the list under the IP user heading:


Logins from the listed domain should now be authorized to access the Monitoring Portal without a password. 



    • Related Articles

    • Adding Dealer User Accounts

      Once your CHeKT dealer account is created, you should create accounts for your installers and central station, if needed. 1. Go to Dealer Account Settings 2. Select the "Users" option. 3. Press the "Add" option in the top right corner 4. Fill in the ...

    • Bridge Relay and the End-User App

      Bridge Relay Configuration and End-User App Navigation With the release of our Version 2 Hardware Model, the CHeKT Solution incorporated the ability to interface with a myriad of external devices by way of a simple relay output. Once configured, the ...

    • Adding a Sub Dealer for Wholesale Central Stations

      Wholesale Central Station Admin users can add additional Sub Dealer accounts, which will provide a Dealer access to their own independent Dealer Portal Interface for management.   Access the WCS Dealer Portal, by navigating to dealer.chekt.com and ...

    • Bridge Network Tab

      Dealer Portal users can access the network configuration settings of each Bridge directly from the site in the dealer interface: These settings can only be accessed after a Bridge is registered.  Registering a CHeKT Bridge Navigate to a customer site ...

    • Adding the Monitoring Station and Account Number to a CHeKT Customer Account

      Before you can add a monitoring center to your customer account you need to configure your Monitoring Stations on the dealer settings.  See how here. This Guide will instruct a user to set the "Monitoring Station" that will receive the signals for ...