Bridge Wiring Information Sheet

• Related Articles

• Bridge Installation - Wiring & Setup Steps

  1. Powering the Bridge The Bridge is powered by 12 volts of DC power. Using the terminal block included in the packaging, connect the positive and negative leads. 12VDC Power Requirement (All Models) ~400 mAmps Power Draw per unit ( CKB304 - 4 ...

• Physical Triggers: Wiring Alarm Inputs on the Bridge

  Depending on the device you are using to trigger the alarm zone of the bridge, there are a few ways you can wire into the bridge.  Below are 3 examples of wiring the Bridge Alarm zones. 1.  Zone Passthrough In this illustration, the Bridge is powered ...

• Understanding the Value of a Site Account Information Sheet

  In this video we will review the value and purpose of CHeKT Site Account Information Sheet.  This Info sheet will be extremely valuable to the security dealer and the monitoring center. 

• Wiring the Arming/Disarm Input of the Bridge (Pre 2019 Bridge Hardware)

  Why is using the Bridge Arming Input Important? Like an alarm panel, the armed state of the Bridge will control when the Bridge input zones and events from camera analytics are active and send signals to a central station. If you set the Bridge to ...

• Bridge Relay and the End-User App

  Bridge Relay Configuration and End-User App Navigation With the release of our Version 2 Hardware Model, the CHeKT Solution incorporated the ability to interface with a myriad of external devices by way of a simple relay output. Once configured, the ...