Mounting LTS Recorders and IP Cameras

Mounting LTS Recorders and IP Cameras

The LTS brand of IP cameras and HD over Coax Recorders support the ONVIF protocol and work with the CHeKT Bridge,  However, there are a couple of settings that must be changed before attempting to mount the DVR Channels or IP Cameras.  Once these steps are completed you can mount the cameras to the CHeKT Bridge.  Click here to see mounting instructions.

LTS DVR's

  1. Enable the ONVIF Protocol and create an ONVIF User on the Recorders.
  2. Set the RTSP Stream Authentication to: Digest\Basic "This is only need on some of the LTS Recorders.)

LTS IP Cameras

  1. Enable the ONVIF Protocol and create an ONVIF User on the IP Camera.



    • Related Articles

    • OPTEX InSight Cameras

      OPTEX InSight Cameras The Optex InSight series are the new members of the OPTEX sensor family of outdoor detection. By combining the dual-tech sensors of an OPTEX sensor and a full HD 1080 camera, you now have a powerful Visual Verification PIR ...

    • Adding Cameras to a CHeKT Bridge

      Links to Additional Steps Creating A Site: Creating a New Customer Site Site Arming Method: Setting Site Arming Source Registering a Bridge: Registering a CHeKT Bridge Alarm Panel Wiring: Alarm Panel Pairing: Programming an Alarm Panel with The ...

    • Mounting Cameras Using the Video Stream URL Function (RTSP)

      Using the video stream URL to mount a camera to the CHeKT Bridge is recommended when the standard API mounting process will not allow connection to the camera stream. We recommend using The Standard Camera Mounting Process whenever possible. These ...

    • Cannot connect cameras to the Bridge.

      There are three phases to connecting a camera to the CHeKT Bridge.   Discovery Authentication Mounting Phase 1: Discovery During this phase, the Bridge will scan the local area network for all ONVIF compatible cameras and HD recorders and display ...

    • ExacqVision Server Mounting Camera Channel – (RTSP Mounting)

      The CHeKT Bridge can mount cameras directly from an ExacqVision server.  In applications where the IP cameras are located on a segmented camera network, the CHeKT Bridge can pull the video stream from the camera through the RTSP protocol of the ...