Setting up a Site & Bridge as a Stand-alone Visual Alert System
Setting up a Site & Bridge as a Stand-alone Visual Alert System
This video will show you how to program your CHEKT site to
operate independently of a traditional alarm system.When programmed in this manner your installed
Bridges can notify your customers and the central station of alarm events. This
allows the Bridges to operate independently of a traditional alarm system.These locally installed Bridge for a customer
communicate on the IP network and events are controlled by the end users mobile
app.
CHeKT Site Map Setup Deployment Guide Document Date: May 2026 Document Number: 003-00103-00 Document Supports: All CHeKT Software Versions Overview The CHeKT platform allows you to upload a site map - such as a floor plan, blueprint, or aerial photo ...
A CHeKT Site can be installed in one of with two arming modes, and these methods determine the type of access a customer has with the CHeKT End-user mobile app and how the Bridge will arm and disarm. Understanding the Arming Modes: Alarm Panel ...
Bridge Relay Configuration and End-User App Navigation With the release of our Version 2 Hardware Model, the CHeKT Solution incorporated the ability to interface with a myriad of external devices by way of a simple relay output. Once configured, the ...
The CHeKT platform supports the upload of a site map and the locations of the pertinent installed devices, providing the operator the ability to do a quick "Virtual Guard Tour" of the property in the event of an alarm. Setting this is only a couple ...
Staying current on the latest firmware is important to ensure your Bridge is operating with the latest features and ensuring all know bugs are resolved. Below are the directions for updating individual Bridge firmware and mass updating accounts. ...