Understanding the Bridge Device ID.

Understanding the Bridge Device ID.

Bridge Device ID


Info
When a Bridge is installed on a client account, it is automatically assigned a Device ID.  This device ID is used to report system information and trouble conditions about this Bridge into your automation platform. The first Bridge assigned to an account will always be Device ID 901.  Each additional Bridge will increment up, 901, 902, 903, and so on.  See the image below as an example.
Notes
Read more about the events and trouble conditions sent into automation  Here




    • Related Articles

    • Alarm Panel Pairing: Programming with The Bridge

      Alarm Panel Pairing Mode: When a Bridge is programming in Alarm Panel Pairing mode, the Bridge is a video alarm module to the on-site alarm system. The Bridge will capture video events for all alarm zone triggers. To change your Site Programming mode ...

    • Bridge Relay and the End-User App

      Bridge Relay Configuration and End-User App Navigation With the release of our Version 2 Hardware Model, the CHeKT Solution incorporated the ability to interface with a myriad of external devices by way of a simple relay output. Once configured, the ...

    • CHeKT Contact ID Library Support Article

      Here is a list of all Contact ID Alarm codes you will need in your automation platform to support CHeKT. The Download is available below.

    • Understanding the Camera Mounting Information

      Understanding the Camera Mounting Information The CHeKT Dealer Portal now offers access to more granular mounting information for each mounted camera channel on the CKB-304, CKB-308, CKB-312 and CKB-416. This article will serve as a guide as to where ...

    • ONVIF Device Manager: Download Guide

      The ONVIF Device Manager tool allows you to check video devices for ONVIF compatibility. Download the tool here: https://workdrive.zohoexternal.com/external/de550e1fc0a638c79034ea3e4e53865baa65f974075c00e733c8a544975c1cfc The CHeKT Video Control ...