Network Configuration
Using the Emergency IP to access the Admin Tool on a Windows PC
Overview: Access Emergency IP: Assign a Static IP/Subnet Windows PC Assigning a static (manual) IP address to a Windows PC ensures the device always uses the same IP on the network. This is sometimes required when connecting devices to a CHEKT ...
Adding a Secondary Network Connection via USB Adapter
This article's primary goal is to teach the user how to set up a dual-NIC configuration using the CKB308 or CKB312 and a third party USB to Ethernet adapter. CHeKT has no officially recommended adaptor, but our agents have confirmed this unit works : ...
Secondary Ethernet Configuration on the Dual NIC CKB416
The CKB416 Hardware version includes a second Ethernet Port that can be configured independently, allowing for connection to the Isolated LAN of a camera or device network. This function is not supported by previous hardware versions The LAN ...
CHeKT Bridge Network Tab Guide
Portal Users can access direct network configuration settings for the CHeKT Bridge/VCP directly from the dealer interface via Site Details > Devices Click on the Bridge Settings: Click on the "Network" Tab: And you will arrive at the Network ...
Bridge Network Requirements for CHeKT
When troubleshooting the connectivity of a CHeKT Bridge it is important to understand a few details. 1. Connectivity Requirements: DHCP Enabled Network: The Bridge obtains an IP address using DHCP by default. The Bridge does support a static IP ...