Dice Integration setup

Dice Integration setup

The integration with Dice has two specific requirements.  Setting up a subscriber account to access CHeKT during an alarm, and  setting up the the DICE XML Receiver.


1. Setup CHeKT Video on a Subscriber Account

  • Go to Data Entry
  • Select the Add Ons Tab
  • Select the Video Data Entry Tab


  • Click the Add button at the bottom of the grid, this will give you a pop up to add a video type


  • Camera Type:URL Video
  • Type: CHeKT

  1. Save

2. Setup your XML Receiver in the CHeKT Dealer Portal.

  • Go to the Dealer Settings

  • Under Integration, Select XML Alarm Receiver
  • Press "Add" in the top right.

  • Select "Dice" as your Brand.

  • Name: Enter a name for your XML Receiver Setup.
  • Description: Enter a description for your XML Receiver Setup.
  • Enable: This must be checked to enable the receiver.
  • Public: If this is selected then other dealers can use this XML Receiver and select your account as their monitoring station.
  • Require Passkey: This will force another dealer to know this passkey if they need to use your account as their monitoring station
  • URL:  This is the address to your XML receiver provided by Dice.
  • Username: Username provided by Dice to connect to the XML Receiver. 
  • Password: Password provided by Dice.

    • Related Articles

    • MicroKey XML Integration Setup

      The integration with MicroKey has two specific requirements.  Setting up an Action Plan and your XML Receiver. 1. Action Plan Setup: Follow these steps to setup your action plan. 2, Setup your XML Receiver: SPA Setup->Receivers Add a Receiver with  ...

    • Sentinel Integration Setup

      The integration with Sentinel requires the Sentinel Administrator to make a few changes to the software settings. There are three parts to this integration. Special Instructions Setup: This portion is what automates an operator's connection to the ...

    • Patriot Integration Setup

      (Version 6.9 or newer required) A receiver URL:Port can be defined in the CHeKT Dealer Portal under the "Gear;" the customer will open a path through the firewall into the server for their selected Port. Patriot will need to assist with this ...

    • MASterMind Integration Setup

      With MASterMind there are two levels of integration. (Version 6.44 or newer required) Launching the CHeKT portal when an alarm is received Receiving XML Signals from the CHeKT Portal Launching CHeKT from MASterMind There are a few steps necessary to ...

    • Bold Integration Setup - URL Launch & XML Receiver

      The integration with Bold has two specific requirements.  Setting up an Action Pattern and your XML Receiver.  Once this is complete you will connect the CHeKT XML Server to your XML Receiver. 1. Bold XML Receiver Setup You will need the Bold FEP or ...