How to replace an installed Bridge with a new unit.

How to replace an installed Bridge with a new unit.

If you need to replace an existing Bridge with a new unit, it is important that you do not delete the installed device.  The proper method of replacing a Bridge with a new unit is defined below.  The process involves "Unresisting" the current Bridge and "Registering" a new Bridge.  It is very important to follow these steps to ensure that you retain all the Bridge configuration settings.

1. Go to the Bridge Settings by clicking the gear in the devices window:




2. Click the 3 Dots on the top right-hand corner to expand the menu, and click the "Unregister Device" Button





4. Confirm your selection by clicking the Red "Unregister" button. 

5. Now Register the replacement bridge in the same location following the familiar process and the configuration information will retain. 

*Always Verify all cameras have reconnected prior to moving on with other operational testing; this may take a few minutes




 

    • Related Articles

    • Bridge Relay and the End-User App

      Bridge Relay Configuration and End-User App Navigation With the release of our Version 2 Hardware Model, the CHeKT Solution incorporated the ability to interface with a myriad of external devices by way of a simple relay output. Once configured, the ...

    • Transfer CHeKT Bridge to new Customer

      IMPORTANT: Please make sure the bridge has been updated to the latest Firmware before beginning this procedure. The process of transferring a bridge to a different customer involves unregistering from the current customer, and then registering the ...

    • Bridge Firmware Version Release Notes

      Below are the release notes for Bridge Firmware versions. Bridge Frimware 4.3.0 - Release Date 1/17/2024 (Minor Release) Previous Versions: Bridge Frimware 4.2.0 - Release Date 12/21/2023 (Minor Release) Bridge Frimware 4.1.2 - Release Date ...

    • Registering a CHeKT Bridge

      Registering a CHeKT Bridge Links to additional steps: Creating a Site: Creating a New Customer Site Registering Cameras: Adding Cameras to a CHeKT Bridge 1. Registering a CHeKT Bridge Once you have created a customer account site you can proceed to ...

    • CHeKT Bridge Hardware Versions

      The CHeKT Solution has a few model options depending on site installation needs. Model Camera Channels Arming Alarm Source Network Adapters Power Purchase Link *CKB304 4 Cloud Arming Only Digital Input Onvif Metadata API Trigger 1 12v DC N/A Legacy ...