Understanding the Bridge Device ID.

Bridge Device ID

When a Bridge is installed on a client account, it is automatically assigned a Device ID.  This device ID is used to report system information and trouble conditions about this Bridge into your automation platform. The first Bridge assigned to an account will always be Device ID 901.  Each additional Bridge will increment up, 901, 902, 903, and so on.  See the image below as an example.

Read more about the events and trouble conditions sent into automation  Here

• Related Articles

• Bridge Relay and the End-User App

  Bridge Relay Configuration and End-User App Navigation With the release of our Version 2 Hardware Model, the CHeKT Solution incorporated the ability to interface with a myriad of external devices by way of a simple relay output. Once configured, the ...

• CHeKT Contact ID Library

  A full list of active Contact ID Alarm codes is always available on your CHEKT Dealer Account in the setting section https://dealer.chekt.com/settings/alarm-library/

• ONVIF Device Manager Download

  The ONVIF Device Manager tool allows you to check video devices for ONVIF compatibility. Download the tool here: https://workdrive.zohoexternal.com/external/de550e1fc0a638c79034ea3e4e53865baa65f974075c00e733c8a544975c1cfc The CHeKT Video Control ...

• Understanding the Camera Mounting Information

  Understanding the Camera Mounting Information The CHeKT Dealer Portal now offers access to more granular mounting information for each mounted camera channel on the CKB304 and CKB312. This article will serve as a guide as to where this information ...

• Enabling and Understanding Site Service Plans

  Enabling and Understanding Site Service Plans Understanding Service Plans The Following Chart and Descriptions of services can be found in the billing section, of the gear settings, of your dealer portal *1 If yes on Prorated, dealers will be charged ...