Cloud-Based Arming & Stand-Alone Visual Alert Configuration

Setting Site Arming Method

A CHeKT Site can be installed in one of with two arming modes, and these methods determine the type of access a customer has with the CHeKT End-user mobile app and how the Bridge will arm and disarm.
Understanding the Arming Modes: Alarm Panel Pairing vs. CHeKT Video Security System
  1. Alarm Panel Pairing: With this programming method, the bridges are armed and disarmed by an on-site security system. This is the default for all sites. With this method, the end-user can access the video, but can’t arm or disarm the CHeKT Devices with the application. Wiring Directions: Wiring the Alarm Panels and Zones to the Bridge
    1. Individual Bridge Voltage Arming: Each Bridge on the site is armed and disarmed independently with the arming pin of the Bridge.
    2. Primary Bridge Voltage Arming: The Primary Bridge of a site is armed and disarmed based on the voltage change. All other Bridges of the site will follow the armed state of the Primary Bridge. The Primary Bridge is the first Bridge of a site, typically Bridge 901.
  2. CHeKT Video Security System: With this programming method, the Bridges are programmed to operate as an independent security system. The CHeKT Bridges on a site become the video security solution for the customer.  The site is armed and disarmed by the customer mobile app or by an arming schedule.

Set Site Arming Method

Select the customer site > Click Site Devices from the menu tab > Click Programming from the submenu tab> Click Edit.



Alarm Panel Pairing:

    1. Click the drop-down menu -> Select your desired arming method

    3. Select Change All Bridges

CHeKT Video Security System

  1. Click the drop-down menu -> Select your desired arming method

  3. Select Change All Bridges
If you are using the CHeKT Video Security System method, ensure you add an end-user Member for arming app control.


    • Related Articles

    • Alarm Panel Pairing: Configuring the Bridge Arming Options

      Alarm Panel Pairing Mode When a Bridge is programming in Alarm Panel Pairing mode, the Bridge is a video alarm module to the on-site alarm system. The Bridge will capture video events for all alarm zone triggers. To change your Site Programming mode ...

    • Alarm Panel Pairing: Programming an Alarm Panel with The Bridge

      Alarm Panel Pairing Mode: When a Bridge is programming in Alarm Panel Pairing mode, the Bridge is a video alarm module to the on-site alarm system. The Bridge will capture video events for all alarm zone triggers. To change your Site Programming mode ...

    • CHeKT Cloud AI Filtering: A Practical Setup Guide

      CHeKT Cloud AI filtering is available to all CHeKT Dealers on the CHeKT Professional and Premium plans; it offers an additional level of false alarm prevention to be used in tandem with the intelligent analytic detection on the mounted camera. How it ...

    • CHeKT Cloud AI

      CHeKT Cloud AI Enable CHeKT Dealer Portal AI Service A: Go to Dealer Settings B: Go to AI Filtering C: Select "Get Started" Review and Acknowledge the CHeKT AI Dealer Agreement Define your dealer default settings for AI Filtering A. Default Provider ...

    • Enabling and Understanding Site Service Plans

      Enabling and Understanding Site Service Plans Understanding Service Plans The Following Chart and Descriptions of services can be found in the billing section, of the gear settings, of your dealer portal *1 If yes on Prorated, dealers will be charged ...