Audio Output
The Audio Output
The audio output is available on our CKB304V1, CKB304V2, and CKB312V1 models, and it only transmits the digital audio data from the Bridge, but it is not amplified. You as an integrator will need to amplify the audio depending on the needs of the site/customer.
To begin broadcasting the audio you will need to remove the silicon cap on the
3.5mm port on the side of the Bridge and plug in the 9in male to female audio extension adapter cable that came with your Bridge.
The CKB312V1 model has the output flushed with the hardware body, so the audio extension adapter cable is not needed.
From the female end of the audio cable, you may now plug in a speaker with your desired amplification.
Related Articles
Creating Dealer Level Audio Talk Down Messages
These directions detail how to create predefined audio messages for your sites. Important Notes: The Audio Talk-Down service for the site must be enabled. Click here for directions. The Bridge must be installed and wired to a local amplified ...Qolsys and the Bridge
Our CHeKT Bridge is designed to respond to the state change in continuity for ease of operation with most security intrusion devices. For wireless systems, it's typical to use an available programmable output and relay combination to apply this short ...Video Monitoring Portal - Using the Audio Talk-Down Service
Pushing an audio message to a site: Important Notes: The Audio Talk-Down service for the site must be enabled. Click here for directions. The Bridge must be installed and configured to connect to a local amplified speaker system. Click here for ...CKB312 Product Information
The CKB312, the 12-Channel Video Bridge. Supports 12 Mounted Camera Streams, with accompanying Blue status LEDS for each mounted channel. Arming Configuration: End-User Mobile App or a Programmable (0-12 VDC) voltage input. Each stream still has the ...The CHeKT Bridge Network Reset Button
The CHeKT Bridge Network Reset Button The CHeKT Bridge Units come with a physical button designed to default the network configuration saved on that unit. The purpose of this button is to allow an installer to return the network parameters of that ...