Installation
IP Speaker Installation
Log into the CHeKT Dealer Portal and access the Site Details tab for the customer that the speaker will be connected to: Under the Add menu, choose Add IP Speaker Select the desired Bridge and Channel: Clicking the Channel will prompt the auto ...
Bridge Relay and the End-User App
Bridge Relay Configuration and End-User App Navigation With the release of our Version 2 Hardware Model, the CHeKT Solution incorporated the ability to interface with a myriad of external devices by way of a simple relay output. Once configured, the ...
Connecting the Bridge to the LAN for Camera Access
The Bridge connects to the local area network with a single ethernet interface card. The local area network that the Bridge connects to must have access to the internet on ports 80 and 443. These are the two ports the Bridge uses to communicate to ...
Setting Site Arming Method
A CHeKT Site can be installed in one of with two arming modes, and these methods determine the type of access a customer has with the CHeKT End-user mobile app and how the Bridge will arm and disarm. Understanding the Arming Modes: Alarm Panel ...
Setting the Bridge Alarm Zone Numbers
A CHeKT Bridge supports up to 4 cameras and 4 alarm input devices. Read here to see how to mount a camera to the Bridge. Read here to see how you can wire an alarm device into the Bridge. Read here to understand the Bridge Device IDs. Once a ...
Setting Bridge Entry\Exit Delay Timers
The CHeKT Bridge supports six zone types. These zone types operate like zones types on alarm panels. Entry/Exit Zone: This zone has an Entry/Exit Delay on the trigger. This requires the Bridge Arming Input to be wired. See instructions here. When ...
Alarm Panel Pairing: Configuring the Bridge Arming Options
Alarm Panel Pairing Mode When a Bridge is programming in Alarm Panel Pairing mode, the Bridge is a video alarm module to the on-site alarm system. The Bridge will capture video events for all alarm zone triggers. To change your Site Programming mode ...
Adding Cameras to a CHeKT Bridge
Links to Additional Steps Creating A Site: Creating a New Customer Site Site Arming Method: Setting Site Arming Source Registering a Bridge: Registering a CHeKT Bridge Alarm Panel Wiring: Alarm Panel Pairing: Programming an Alarm Panel with The ...
Registering a CHeKT Bridge
Registering a CHeKT Bridge Links to additional steps: Creating a Site: Creating a New Customer Site Registering Cameras: Adding Cameras to a CHeKT Bridge 1. Registering a CHeKT Bridge Once you have created a customer account site you can proceed to ...